Burst & Zick
Cutting, Stamping & Forming Devices RADIAL Components
C 053: Cutting Device for belted components
The C 053 is designed to cut the leads of axial or radial leaded components incl. IC's to required length.
Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high-quality tool steel hardened to 60 HRC and polished.
| Dimension | 300 x 130 x 120 mm, approx. 3 kg. |
| Compressed air | 4 to 6 bar |
| Hole pattern | 13x21 drill holes for edge connectors; circle pitches for operational amplifiers and transistors; and laterally slits for cutting components with long leads. |
| Cut length | standard 3mm (different dimensions on inquiry) |
| Lead diam. | 0,8mm to 1,0mm |
| Pitch | 2,5 and 2,54 mm |
| Operation | manual via pneumatic Foot pedal |
| Production rate | 2000 pcs/hr |
|
COMPONENT FORMS |
|
C 055 H: Cutting Device
The C 055 H is designed to cut the leads of axial or radial leaded components incl. IC's to the required length.
Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high-quality tool steel hardened to 60 HRC and polished.
| Dimension | 280x 140 x 120 mm, approx. 1,5 kg. |
| Pitch | 13x21 drill holes |
| Cut length | standard 3mm (other dimensions on request) |
| Drill diam. | 1,1mm (other dimensions on request) |
| Production rate | approx. 1500pcs/hr |
| Hole pattern | TO 18/TO 92/TO 5: 2,54 x 1,27 mm; 5,08 x 2,54 mm; 7,62 mm x 5,08 mm; Round-pitch for operational amplifiers with 8 and 10 leads; and laterally slit for cutting of components with long leads. |
| Operation | manually |
COMPONENT FORMS
C 057: Universal Cutting Device
The C 057 is designed to cut the leads of axial and radial components incl. ICs to the required length.
Even female connectors can be processed with this device. A diagonal arranged cutting knife is be driven over the whole working surface, so each component terminal is cutted by itself. The plates are made of high quality tooling-steel, hardened to 60 HRC and polished.
| Dimension | 420x 200 x 70 mm, approx. 3,5 kg. |
| Compressed air | 4 to 6 bar |
| Pitch | 2,5 and 2,54mm |
| Cut length | standard 3mm (other dimensions on request) |
| Lead diam. | 0,8 to 1,3mm (other diameters on request) |
| Production rate | approx. 2000pcs/hr |
| Hole pattern | 13 x 21 drill holes for edge connectors; Round-pitches for operational amplifiers and transistors; and laterally slit for cutting components with long leads. |
| Operation | pneumatic foot pedal |
COMPONENT FORMS
